We all know the importance of motorcycle tires and their good state of conservation when it comes to circulating safe. But at the same time, also an adequate or incorrect choice, it can make the motorcycle have adequate dynamic behavior or, on the contrary, it costs us much more to carry it correctly.
If all this was not enough, the tires are also closely related to the engine response, as well as consumption and therefore, make any route a enjoyment or, on the contrary, an experience that we surely do not want to repeat.
So that you can choose an adequate tire and, at the same time, make an adequate use of them, we invite you to read and follow our advice.
Filming resistance and energy efficiency
The filming resistance is the force that opposes the movement of the tire on the asphalt. The higher this resistance, the more energy the motorcycle will need to advance, which translates into greater fuel consumption. Factors that influence filming resistance include:
- Composed of the tire: Soft compound tires offer greater grip, but also generate more friction, which can increase consumption.
- Inflation pressure: A low pressure tire generates greater contact surface and more resistance, increasing the engine effort.
- Drawing and design: Tires with aggressive patterns or large tacos can increase road filming resistance.
- Tire weight: Lighter tires reduce inertia and improve engine acceleration and efficiency.
Power and engine response
The choice of tires also affects power delivery and engine response. A wider or friction tire can slow the acceleration, while a more efficient model allows a better asphalt power transfer. Some key aspects include:
- Tire profile: A more triangular profile improves maneuverability and speed in changes of direction. One more rounded, transitions are more neutral and stable.
- Radial tires vs. diagonals: Radial tires generate less heat and offer less resistance, improving road efficiency.
- Composed of the rolling band: A compound compound (hard in the center and soft on the sides) can improve stability in lines and grip in curves without compromising power.
Efficient fuel and tire consumption
The type of tire you choose can make a difference in fuel consumption. To improve the efficiency of your motorcycle, consider the following points:
- Adequate pressure: Maintain the pressure recommended by the manufacturer prevents excessive fuel consumption.
- Tire with low filming resistance: Models designed to optimize energy efficiency can reduce consumption to 5%.
- Avoid worn tires: An old tire or with insufficient drawing can reduce adhesion and force the engine to strive more to maintain speed.
Maintenance for optimal performance
To ensure that your tires do not negatively affect your motorcycle, follow these recommendations:
- Check the pressure weekly: Incorrect pressure can increase wear and fuel consumption.
- Control drawing wear: If the drawing is below the legal minimum (1.6 mm), the tire loses efficiency and security.
- Performs a proper balance and alignment: A balanced or alignment generates vibrations and irregular wear, in addition to reducing the stability of the motorcycle.
- Change the tires when necessary: Even if they are not visually worn out, tires lose elasticity and grip over time.
