Husqvarna Mobility has presented the new FC 250 Factory Edition and FC 450 Factory Edition 20272 limited production models that anticipate the path that its next generation of motocross. Developed from the experience acquired in competition and the contributions of professional and amateur pilots, both come with an important technical evolution that goes far beyond an aesthetic update.
The main novelty is found in the FC 250 Factory Editionwhich debuts a completely new engine designed to offer superior performance without compromising drivability. The FC 450 Factory Editionfor its part, also receives improvements in different mechanical and electronic sections, with special attention to intake, power and engine management.
The FC 250 has a new engine and reaches 14,500 rpm
The new engine of the Husqvarna FC 250 Factory Edition It is one of the most outstanding elements of this renovation. It is a 4-stroke single-cylinder and double overhead camshaft, with a completely revised architecture, higher compression ratio and a higher maximum speed.
With 249.9 cc of displacement and a limit of 14,500 rpm, the new engine seeks to offer a more forceful and usable response throughout the revolution range. Husqvarna has worked especially on maintaining a progressive and predictable delivery, 2 fundamental characteristics so that the driver can take advantage of his full potential on the circuit.
The FC 450 Factory Edition It also evolves with improvements to the intake system, top-feed fuel injection and new electronic management. These modifications, largely shared by both versions, seek to optimize combustion efficiency, throttle response and power delivery.
New WP XACT fork and revised chassis
The cycle part receives a particularly important update. Both the FC250 like the FC 450 Factory Edition 2027 incorporate the latest generation of fork WP XACT closed cartridge, with 48 mm bars.
This new solution comes after an intense testing program with pilots of different levels, from amateurs even participants in the World Championship. The objective is to achieve more consistent operation, improve the sensitivity of the front axle and convey greater confidence on irregular surfaces.
The rear suspension also receives a revised setup, while the chassis incorporates changes to its geometry and rigidity parameters. The Swedes thus seek to improve stability at high speed without giving up the agility necessary to face tight curves and quick changes of direction. Work has also been done on the position of different components and their behavior. anti-squat to optimize the response of the rear suspension during accelerations.
Factory Racing components and exclusive decoration
As corresponds to the most special versions of the family, the new FC Factory Edition They incorporate a selection of top-level components. Among them, the seatposts stand out WP Pro Components mechanized CNCthe handlebar ProTaperfists ODI lock and seat Factory Racing with cover GUTS.
The specific equipment also includes an external clutch cover Rekluseoutput device FactoryStartbass protector Factory Skid Plate and front disc protector. The tires Factory Racing of WP Pro are combined with tires Dunlop Geomax MX34floating front disc type waveblack rear crown and gold chain.
In the aesthetic section, Husqvarna opts for a combination of predominant white and dark blue details, accompanied by the official graphics Team Husqvarna. An image that maintains the visual identity of the house and reinforces the exclusive character of these 2 editions.
Availability and price of the Husqvarna FC Factory Edition 2027
In Spain, the FC 450 Factory Edition listed with an announced price of 13,495 euroswhile the final price of the FC 250 Factory Edition and its availability in our market are still pending confirmation.
With this renewal, Husqvarna reinforces its commitment to MX competition and transfers to its models Factory Edition a new generation of solutions. The FC250 takes an important step forward with a completely new engine, while both machines share an evolution of the chassis that promises to improve their behavior on the circuit. That without a doubt…
Technical characteristics Husqvarna Mobility FC Factory Edition 2027
- New 250cc engine designed for maximum performance, featuring an oval throttle body, oval intake and cylinder head with machined combustion chamber.
- The new engines are located slightly higher in the chassis to improve handling anti-squat.
- New chassis with redefined rigidity parameters and a powder-coated gloss white finish.
- Newly developed WP XACT spring and closed cartridge forks.
- The WP XACT shock connects to a new linkage system and is positioned to allow more direct air intake.
- New exhaust systems with resonance chambers in the manifold.
- Exhaustive updates to both engines, especially in the cylinder head area.
- Top feed injection and new engine management system for both models.
- Greater ease of maintenance thanks to a new layout of the electrical installation and an optimized arrangement of the components.
- Premium Graphics Kit Team Husqvarna applied using in-mold technology.
- Rekluse clutch outer cover.
- Factory Racing seat with GUTS cover.
- Factory Racing chassis protection set.
- ProTaper handlebar and handlebar pad.
- Soft gray ODI lock-on grips.
- Factory Racing steering plates (WP PRO COMPONENTS).
- Wave floating front brake disc.
- Front brake disc protector.
- Factory output device (WP PRO COMPONENTS).
- Factory crankcase protector.
- Factory competition rim set (WP PRO COMPONENTS).
- Dunlop Geomax MX34 tires.
- Black rear crown.
- Gold competition chain.
